منحنی های قالب

Curves on the last (unified lasts

For unified lasts, an addititional option is included on the second page of the Last Identification Wizard:

kp1

Use to move the feather curve up and down. This helps to create the correct feather line when the feather edge is not sharp.

Curves on a last (STL file only)

This page is displayed if you are using a last in .stl format.

kp2

Select the top curve Top curve

kp3

  1. Click one of the following buttons:

Back displays the Surfaces of the last page.

Next displays the Points on the last page.

Finish creates the last.

Cancel finishes the Last Identification Wizard without making any changes.

 

Curves on the last

Use the second page of the Last Identification Wizard to select the curves on the last.

Different versions of this page are displayed if you are using:

  1. Select the top curve Top curve.fr1 fr2 fr3 fr4
  2. Curves on a last (STL file only)

    This page is displayed if you are using a last in .stl format.

    gh3gh4gh5

    Curves on the last (unified lasts)

    For unified lasts, an addititional option is included on the second page of the Last Identification Wizard:

    Use to move the feather curve up and down. This helps to create the correct feather line when the feather edge is not sharp.

    gh1

     

 

You may also like...

0 thoughts on “منحنی های قالب”

پاسخ دهید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *