Posts By :

admin

تخفیف سال نو

تخفیف سال نو 150 150 admin

http://mashadshoes.ir/2020/04/29/%d8%aa%d8%ae%d9%81%db%8c%d9%81-%d8%b3%d8%a7%d9%84-%d9%86%d9%88/

نیم بوت مدل ستایش

نیم بوت مدل ستایش 700 700 admin

[flagallery gid=41 skin=photomania]

کد کالا:۲۰

رویه ورنی
آستری فوم
پاشنه مبلی
زیره داووس
رنگ زرشکی

سایزهای موجود : ۳۶ ۳۷ ۳۸ ۳۹ ۴۰

رنگ های موجود

IMG_8194

تلفن های سفارش محصول:
۵۴   ۰۱   ۱۳   ۳۷ – ۰۵۱ ، ۵۹   ۶۱   ۵۱۵ – ۰۹۱۵

بچه گانه ۱

بچه گانه ۱ 150 150 admin

بازیابی گذرواژه

بازیابی گذرواژه 150 150 admin

[bbp-lost-pass]

ثبت نام در تالار گفتگو

ثبت نام در تالار گفتگو 150 150 admin

[bbp-register]

سطوح روی قالب

سطوح روی قالب 150 150 admin

Surfaces of the last

This is the first page of the Last Identification Wizard. Use this page to select the surfaces of the last to be used by the wizard.

sd8 sd10 sd11

 

منحنی های قالب

منحنی های قالب 150 150 admin

Curves on the last (unified lasts

For unified lasts, an addititional option is included on the second page of the Last Identification Wizard:

kp1

Use to move the feather curve up and down. This helps to create the correct feather line when the feather edge is not sharp.

Curves on a last (STL file only)

This page is displayed if you are using a last in .stl format.

kp2

Select the top curve Top curve

kp3

  1. Click one of the following buttons:

Back displays the Surfaces of the last page.

Next displays the Points on the last page.

Finish creates the last.

Cancel finishes the Last Identification Wizard without making any changes.

 

Curves on the last

Use the second page of the Last Identification Wizard to select the curves on the last.

Different versions of this page are displayed if you are using:

  1. Select the top curve Top curve.fr1 fr2 fr3 fr4
  2. Curves on a last (STL file only)

    This page is displayed if you are using a last in .stl format.

    gh3gh4gh5

    Curves on the last (unified lasts)

    For unified lasts, an addititional option is included on the second page of the Last Identification Wizard:

    Use to move the feather curve up and down. This helps to create the correct feather line when the feather edge is not sharp.

    gh1

     

 

نقاط روی قالب

نقاط روی قالب 150 150 admin

Points on the last

Use the third page of the Last Identification Wizard to select the points on the last. The graphic on the wizard will help you identify the correct point on your model.

kp6

  1. Select the following points on the last:
    • Inner girth point
    • Outer girth point
    • Centre girth point
    • Toe point
    • Cone point.
    • Vamp point
    • Heal top point.
    • Heel bottom point.
  2. Click User Defined Points to create additional points on the last. The User Defined Points dialog is displayed.
  3. Click one of the following buttons:

 

ویژگی های قالب

ویژگی های قالب 150 150 admin

Attributes of the last

Use the final page of the Last Identification Wizard to add additional information to the last.

kp8

  1. Specify the Type by selecting Left or Right shoe.
  2. Select the sizing Standard from the drop-down list. The standard is defined in the PSSHOESIZE_xx.csvfile, where xx is the name of the standard. This file is located in the\file\shoe\treatment folder in the location of your installation.
  3. Set the Size group for the new last and preserve this information once set.

The information regarding the size group settings is stored in the PSSHOESIZE_xx.csv file, together with the size and unit settings. The .csv file will contain shoe sizes that are applicable to that last. This will help determine the sizes you want to manufacture when it comes to grade a shoe designed from this last.

A typical section in the .csv file might be:

#SizeGroupStart

Infant,Child_0,Child_1,Child_2,Child_3,Child_4,Child_5,Child_6

Children,Child_7,Child_8,Child_9,Child_10,Child_11,Child_12,Child_13

Youth,1,2,3,4,5

Women,2,3,4,5,6,7,8

Men,5,6,7,8,9,10,11,12

#SizeGroupEnd

Once the size group information is set and the model is saved, the drop down list will display the size group information.

kp9

  1. Select the Size of the last.
  2. Enter a Name for the last.
  3. Enter a Description of the last.
  4. Click one of the following buttons:

Cancel to finish the Last Identification Wizard without making any changes

 

ویرایش قالب-stick

ویرایش قالب-stick 150 150 admin

Last editing – Stick length

 Use the Stick length options to specify the parameters that are modified when you change the stick length.

kp11kp12